Artesian Well

Artesian Well, a well in which water rises under its own pressure, without pumping. If the pressure is great enough, the water will rise all the way to the surface and flow freely from the well. The name “artesian” is derived from Artois, France, where such wells were sunk as early as 1126.

An artesian well is drilled into an aquifer, a water-bearing layer of porous rock. The aquifer lies between two impervious layers of rock that is, layers of rock through which water cannot pass. The artesian system (the aquifer and the impervious layers) slopes, and the well is sunk at a point where the aquifer is lower than the place where water, from rain or melting snow, enters the system. The weight of the water held in the upper portions of the aquifer results in the pressure that forces water to rise in the well. Where there is a natural opening in the impervious layer above an aquifer, water is sometimes forced to the surface, forming an artesian spring.

The water in many artesian systems is pure, while in others it is strongly mineralized. The principal areas where artesian systems occur in the United States are the Great Plains, from North Dakota to Texas, and the Atlantic Coastal Plain. The Central Valley of California is also an artesian area. Portions of the Sahara have been reclaimed by the use of artesian wells. Australia’s Great Artesian Basin, a vast area to the west of the Great Dividing Range, is noted for its artesian wells.

Geological strata giving rise to an artesian well.

An artesian aquifer is a confined aquifer containing groundwater that will flow upward through a well, called an artesian well, without the need for pumping. Water may even reach the ground surface if the natural pressure is high enough, in which case the well is called a flowing artesian well.

An aquifer is a layer of soft rock, like limestone or sandstone, that absorbs water from an inlet path. Porous stone is confined between impermeable rocks or clay. This keeps the pressure high, so when the water finds an outlet, it overcomes gravity and goes up instead of down. The recharging of aquifers happens when the water table at its recharge zone is at a higher elevation than the head of the well.

Fossil water aquifers can also be artesian if they are under sufficient pressure from the surrounding rocks. This is similar to how many newly tapped oil wells are pressurized.

Links:

Wikipedia

http://www.wisegeek.com/what-is-an-artesian-well.htm

http://science.howstuffworks.com/artesian-well-info.htm

About Rashid Faridi

I am Rashid Aziz Faridi ,Writer, Teacher and a Voracious Reader.
This entry was posted in water. Bookmark the permalink.

1 Response to Artesian Well

  1. Salman says:

    Dear Madam/Sir
    I am Engineer ” Salman Al-yas” from Iraq/Baghdad
    Mobile no. 00964 7901 551861
    I am looking for a maker”Supplier” for the equipment required for Artesian Wells in the area of Iraq.
    If you are the one whom I am looking for,PS reply to re-message you.
    Kindly if you are not,direct me to whom I look for
    Thanks in advance
    Sincerely
    Salman

    Like

Leave a Reply to Salman Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.